Splash Paints, 2K Ultra Gloss Clear SP-UC1

Splash Paints, 2K Ultra Gloss Clear SP-UC1

9.50

Splash, 2K Ultra Gloss Clear

BRAND NEW improved formula with an even higher gloss finish.

A mixing ratio of 3:1 with no need to mix thinners.

1X Clear Gloss Coat 30ml

1X Catalyst 10ml

2 bottles 40ml total

Back-order, due back in stock early/mid-June

Quantity:
BACK-ORDER

Splash 2K Ultra Gloss Coat

1X Clear Coat 30ml

1X Catalyst 10ml

A mixing ratio of 3:1 with no need to mix thinners. Apply with a nozzle/needle size between 0.15 mm to 0.4 mm (0.3mm is recommended). At around 30 PSI.

If you feel that thinning is needed use Splash, Urethane Grade Lacquer Thinner or Mr Hobby, Mr Color Levelling Thinner (do not use cheap thinners). Add a small amount at a time and test, do not over thin.

How we spray

We recommend you mix 4/6ml of clear total for a standard 1/24 scale car. Apply one medium wet coat followed by one full wet, leaving for 5/10 minutes between coats to flash off. You maybe feel a third coat is necessary if you have some orange peel or the decals have not been fully covered. Spraying wet but not heavy coats is the key to a perfect finish every time.

Manufacturers recommended spraying guidance

-1st coat: Medium wet coat

Flash off 5 minutes

-2nd coat: Wet  coat

Flash off 5 minutes

-3rd coat (optional, not required): Wet coat

Cure at room temperature for 24-48 hours before handling/sanding or 60 minutes in dehydrator @140F.

Flash offs are important between coats to prevent runs. Apply wet but not heavy coats, as applying coats to heavy, will cause runs. If you feel you have applied too much, stop and allow to flash off for 5/10 minutes.

High solid clear coat with enhanced self-levelling and increased UV stabilizer rated outdoors 10+ years with no clear coat shrinkage during curing for ultimate orange peel free finish. 

DO NOT SHAKE ACTIVATOR BOTTLE. IF YOU DO SHAKE, CLEAN THE BOTTLE LIP TO PREVENT THE CAP GETTING STUCK.


2K Acrylic Urethane, HARMFUL VAPOURS.  WEAR RESPIRATOR & GLOVES AT ALL TIMES,

DON’T BREATHE PRODUCT IN OR LET IT TOUCH BARE SKIN. USE WITH A SPRAY BOOTH.

KEEP OUT OF CHILDREN'S REACH

FLAMMABLE, KEEP AWAY FROM HEAT SOURCES

MADE IN PORTLAND U.S.A